If you have been into inline skating for any decent amount of time, then chances are you have heard the term rockering before. You might even know what rockering is, and this will just be remedial information for you. But if you do not, then this could be quite enlightening for you.
Out of the box, most inline skates are configured in what is known as a “flat setup”. All three, four, or five (child’s skate, standard recreational or short racing skate, and full size racing skate wheel counts, respectively) wheeled skates will have the wheels set at the same height. This is a flat setup, and is an all around good way to start out skating. It is also the standard setup for recreational / fitness skating.
The next main setup is known as a full rocker, or banana / crescent. This involves setting your front and back wheels slight higher than your middle two wheels. This is going to provide the inline skater with great maneuverability, which is good for those who wish to emulate ice skating on dry land. It also provides less stability, so balance can be an issue. Obviously it should go without saying that use of full rockering should be used with great care, and then only by skilled inline skaters. Novice inline skaters will likely find them selves unable to control their direction very well, and will also spend large amounts of time on the ground, possibly with skinned palms or knees.
The next type of rocker is called a front rocker. This style of rockering has the lead wheel on each skate set high, with the trailing 3 in their regular placement. This rockering style is generally used by street skaters, and has two main purposes: the high front wheel allows the skate to better go over imperfections in the ground instead of digging in and stopping, while the remaining 3 flat wheels still provide you with a decent flat profile for pushing power, so that good speed can be kept.
Another type of front rocker setup is one sometimes used by inline hockey skaters, and involves the rockering of the rear 2 wheels, and using smaller wheels for the front two. This makes it resemble a flat setup, sine all 4 wheels are in fact touching the ground. It is purported that this setup provides better maneuvering in corners while still giving the speed of larger wheels when going straight, but this is debatable.
Lastly is the anti-rocker setup. This is the reverse of standard rockering, in that your front and back wheels will be on the ground, while your middle two will not. This, coupled with devices called “grind plates” facilitate ease of sliding along hand railings, curbs, benches, and other surfaces on which an aggressive, or trick skater may wish to grind. The means by which this rocker is accomplished can be done in one of two ways: use small wheels for the two center wheels, or raise the center two wheels. The use of small wheels is the most prevalent means.
Photo Credits: digicla
Originally posted 2009-10-09 03:47:12. Republished by Blog Post Promoter
Related Posts -
Surf Skate Expo Experiences 20th Year in Orlando The Surf Expo is an annual surf and skate trade show that is put together every year at the Orange County Convention Center in Orlando, Florida. This is the most popular surf and skate trade show for the last twenty years, and the most recent year was absolutely no exception...... -
Braking in Skating Learning how to stop when you are riding inline skates really is not rocket science, and yet there are many novice skaters that actually struggle when it comes to braking simply because they have an intense fear that they are going to fall. This fear often comes from having to...... -
Surf, Skate, Wakeboard: Gear and Accessories The thrill and action of surf boarding, skate boarding and wake boarding takes skill, practice, and receiving a few bumps and bruises. It also requires good equipment, since no amount of skill can make up for a board past its prime. Choosing the right board is a matter of preference,...... -
Best Products for Wakeboarding Wakeboarding is a sport that can actually be thought of as a combination of a number of sports: surfing along with water skiing, with a bit of snow boarding thrown in. Wakeboarding is a sport that is performed on the water surface, specifically the wake that is behind a speed...... -
ABEC ratings: Is higher really better? Pt. 2 Now do you see what I mean by these tolerances being mangled by the first few minutes of riding down the sidewalk? The pressure of you riding, along with the shocks of bumps and the cracks in the sidewalk will quickly add a lot more eccentricity to this groove, but......
Related Websites -
Where Excavators Fit In Excavators range from mini-excavators that are used for light-duty digging to mammoth pieces of equipment that weigh over 1,000,000 pounds and have over horsepower behind them. These are serious pieces of earth moving equipment typically found only at construction sites, river dredgings, forest clearing, mining and other major excavations. Mini-excavators...... -
Fishing North and South of the I-80 North of the I 80 There are actually more good spots for fishing north from the Interstate 80 than many people realize. Unfortunately, all of these fishing spots are going to require some driving on dirt roads for access. Locals generally use trucks and 4 wheel drive vehicles to get...... -
Good Coins to Start Your Coin Collection One of the things that make coin collecting so incredibly interesting is the sheer wealth of different coins that you can add to your coin collection. Currencies from around the world provide thousands of different types of coins that can be collected. It can be difficult to find the coins...... -
Fishing and Boating Lexicon Continued Bullet Sinker - This is a type of sinker that is free to move along the line, it is shaped like a cone and may be made of lead, steel, or zinc and comes in a variety of weights. Buzz bait - This is a type of bait that stays...... -
The Purpose of Excavators Excavators are huge pieces of industrial machinery designed for digging that are often just called diggers in the construction industry. They consist of a large chassis with a cab in which the operator sits, a track system for movement and a boom arm with a digging bucket on the end.......
- Women Inline Skates Skate Shop
- Girls Inline Skates Skate Shop
- Mission Inline Skates Skate Shop
- Full Sets Pokemon Animation Trading Cards Collectibles
- Mystery Skateboards Skateboarding Skate Shop
Categories:
Skating, Surf Skate Wake
Tags:
0 comments ↓
There are no comments yet...Kick things off by filling out the form below.
Leave a Comment