180 – This is a term that refers to a half rotation.
360 - This is a term that refers to a single full rotation.
540 - This is a term that describes a 540-degree rotation while in the air. This is equal to one and a half full rotations.
720 - This is a term that typically refers to two simultaneous 360-degree turns, either forward or in a backward direction.
900 - This is a term that describes two and a half full rotations.
5-0 Grind - This term describes a type of grind in which the only trick that is grinding is the back truck.
50/50 - This term describes a type of grind in which both of the trucks are grinding.
Abec - This term is used to describe the tolerance rating system that is applied to bearings, designating the level for the bushing’s stress resistance. Higher Abec ratings refer to tighter bearings and lower Abec ratings refer to looser bearings.
Acid Drop – This refers to riding straight off of an obstacle, free falling to the ground.
Air – This is the term that is used to refer to situations where riders are clearing obstacles or jumps.
Alley Oop - This refers to a situation where a trick is being performed in an opposite direction from the direction that the skater is moving in.
Backside - This refers to a situation where a trick or a turn is being executed in a direction that the rider’s back is facing.
Bank - This is any area that is sloped below 90 degrees.
Bearings - There are both inner and outer parts in bearings, and the balls ride on them, making it possible for the wheels to turn.
Blunt - This describes a situation where a trick is being performed and the board’s contact spot with whatever obstacle is being used is the tail area behind the board’s back trucks. The wheels should also be on top of the item in question.
Board – In skateboarding, this is also known as a deck, and is the platform part that all of the hardware is mounted on to. The most common material used for a skateboard deck is maple laminate.
Boardslide or Railslide - This is a trick that involves sliding on an obstacle or a lip where the underside of the board is the contact point.
Brain Bucket – This is a slang term that refers to a helmet.
Caballerial - On flat ground this is a term that describes riding fakie, do an ollie 360 without any grabbing. On a vert ramp, this is a term that describes riding fakie, and doing an ollie 360 without grabbing at the lip. This trick was invented by Steve Caballero
Carve - This is a term that describes making long curving arcs while skating, especially downhill.
Photo Credits: mikebaird
Originally posted 2009-11-16 03:23:30. Republished by Blog Post Promoter
Related Posts -
Rollerblading Safety Rollerblading is a truly wonderful sport and it provides for great exercise, keeping you in shape. People from all over the world and all kinds of walks of life can enjoy rollerblading simply because its very nature is fun and easy. Coupled with the enjoyment of the sport of rollerblading,...... -
How to Clean and Lubricate Skate Bearings Clean bearings are going to roll smoother, roll faster, and will last much longer than dirty bearings. Dirt and grime foul the bearings and can cause pitting which make rotation uneven and rough. The following paragraphs have instructions for cleaning bearings with removable shields. If you do not have removable...... -
Surf Skate Wake Board - What's Your Passion? For many people, there is nothing that they find to be more exhilarating or exciting then boarding of all types. This can mean surfing, skate boarding, wake boarding and more. For many people it may e the danger that they feel or even the endorphins that they feel coursing through...... -
Surf, Skate, Wakeboard: Gear and Accessories The thrill and action of surf boarding, skate boarding and wake boarding takes skill, practice, and receiving a few bumps and bruises. It also requires good equipment, since no amount of skill can make up for a board past its prime. Choosing the right board is a matter of preference,...... -
ABEC ratings: Is higher really better? Pt. 1 In the worlds of inline and board skating, you will find many areas of much debate. However, one of the most contested areas you will encounter is that of skate bearings. German? Swiss? Ceramic? Stainless Steel? ABEC rating? So many choices, and so many opinions on what is better and......
Related Websites -
Snowboarding Glossary Continued T Bolt - This is a term that is used to describe a small metal cylinder that is threaded inside and that has a disk attached to its bottom, which will prevent it from being pulled up and away from the snowboard. Technical - This is a term that is...... -
Lumber Terms pt 2 Ply - This term describes a single layer of veneer. Pressure Treating - This term describes impregnating pieces of lumber with chemicals like fire retardants and preservatives through the forcing of the chemicals with high pressure into the wood's very structure. Reman - This is a shortened term referring to...... -
Lumber Terms And Better - This is typically abbreviated as "&Btr", and what it indicates is that the lumber contains pieces that exist in a higher grade than the lowest grade that is acceptable. Appearance Grade - This is a grade used for framing lumber that is intended for use in exposed...... -
Snowboarding Glossary Continued Twin Tip - This is a term that is used to describe a variety of snowboard that is specifically designed for snowboarding freestyle. This type of snowboard has a tip and a tail that are identical, making it possible for the board to be ridden in both directions in a...... -
Snowboarding Glossary Continued Sky - This is a term that is used to describe when big air is achieved by a rider. Slalom - This is a term that is used to describe a type of Alpine snowboarding racing where the racer has to run along a designated course where a series of......