If you have been into inline skating for any decent amount of time, then chances are you have heard the term rockering before. You might even know what rockering is, and this will just be remedial information for you. But if you do not, then this could be quite enlightening for you.
Out of the box, most inline skates are configured in what is known as a “flat setup”. All three, four, or five (child’s skate, standard recreational or short racing skate, and full size racing skate wheel counts, respectively) wheeled skates will have the wheels set at the same height. This is a flat setup, and is an all around good way to start out skating. It is also the standard setup for recreational / fitness skating.
The next main setup is known as a full rocker, or banana / crescent. This involves setting your front and back wheels slight higher than your middle two wheels. This is going to provide the inline skater with great maneuverability, which is good for those who wish to emulate ice skating on dry land. It also provides less stability, so balance can be an issue. Obviously it should go without saying that use of full rockering should be used with great care, and then only by skilled inline skaters. Novice inline skaters will likely find them selves unable to control their direction very well, and will also spend large amounts of time on the ground, possibly with skinned palms or knees.
The next type of rocker is called a front rocker. This style of rockering has the lead wheel on each skate set high, with the trailing 3 in their regular placement. This rockering style is generally used by street skaters, and has two main purposes: the high front wheel allows the skate to better go over imperfections in the ground instead of digging in and stopping, while the remaining 3 flat wheels still provide you with a decent flat profile for pushing power, so that good speed can be kept.
Another type of front rocker setup is one sometimes used by inline hockey skaters, and involves the rockering of the rear 2 wheels, and using smaller wheels for the front two. This makes it resemble a flat setup, sine all 4 wheels are in fact touching the ground. It is purported that this setup provides better maneuvering in corners while still giving the speed of larger wheels when going straight, but this is debatable.
Lastly is the anti-rocker setup. This is the reverse of standard rockering, in that your front and back wheels will be on the ground, while your middle two will not. This, coupled with devices called “grind plates” facilitate ease of sliding along hand railings, curbs, benches, and other surfaces on which an aggressive, or trick skater may wish to grind. The means by which this rocker is accomplished can be done in one of two ways: use small wheels for the two center wheels, or raise the center two wheels. The use of small wheels is the most prevalent means.
Photo Credits: digicla
Originally posted 2009-10-09 03:47:12. Republished by Blog Post Promoter
Related Posts -
High Tech Deck Skate Park Choices There is a great deal of interest in high tech deck skate park materials today as more and more people are becoming interested in the sport once again. As you watch the interest in skateboarding becoming more popular every year, there is more reason than ever for the innovations in...... -
More on Inline Skate Wheels The Core The core of the wheel is comprised of the hub and the spokes. The bearings and spacers are housed inside the inner hub. The spokes and outer hub are what the polyurethane itself is attached to. The way the core is designed, and the materials from which the...... -
Surf, Skate, Wakeboard: Gear and Accessories The thrill and action of surf boarding, skate boarding and wake boarding takes skill, practice, and receiving a few bumps and bruises. It also requires good equipment, since no amount of skill can make up for a board past its prime. Choosing the right board is a matter of preference,...... -
Skateboarding Lexicon 180 - This is a term that refers to a half rotation. 360 - This is a term that refers to a single full rotation. 540 - This is a term that describes a 540-degree rotation while in the air. This is equal to one and a half full rotations....... -
Surf Skate Wake Board - What's Your Passion? For many people, there is nothing that they find to be more exhilarating or exciting then boarding of all types. This can mean surfing, skate boarding, wake boarding and more. For many people it may e the danger that they feel or even the endorphins that they feel coursing through......
Related Websites -
Advantages of Crawlers Crawlers can be any type of heavy-duty, outdoor equipment fitted with tracks instead of wheels. The term is most often used to refer to a heavy-duty tractor fitted with tracks but is also used to refer to anything from skid loaders to massive excavators that use a track system instead...... -
Fishing and Boating Lexicon Continued Bullet Sinker - This is a type of sinker that is free to move along the line, it is shaped like a cone and may be made of lead, steel, or zinc and comes in a variety of weights. Buzz bait - This is a type of bait that stays...... -
Glossary: What is a Hybrid Car? As hybrid cars gain in popularity, many people find themselves asking "What is a hybrid car?" To answer this question, we are supplying a mini lexicon of hybrid car terms and hybrid car technology terms. Let this be a foundation that you can build upon as you learn more about...... -
Womens Bicycles Too many people think about the design which was made popular in the 1800âs for womens bicycles. These had a low sweeping top tube to accommodate a dress. These days there is no longer a need for the low top tube. There is however, still a need for a different...... -
Snowboarding 101 - Learning to Skate Mastering the concept of skating from point A to point B is a really useful skill that you can learn when it has to do to snowboarding. You are going to have to know how to skate whenever it comes to making transfers mid-mountain from one lift to another, or......