July 27th, 2010 — Surf Skate Wake, skateboarding
Concave – This is a term that describes the contouring of a skate deck. It involves the raising of the edges on each side of the board, making it somewhat bowl shaped. This helps provide more traction and control to the rider for staying on and performing tricks.
Continuous Edge - This is a term that is used to describe edges that are designed without having small cracks in the outermost contact area. This is often used for adding strength and sometimes stiffness to the board’s edges.
Coping - This is a rounded lip found at the very top of a ramp or an obstacle, and it is typically comprised of metal, PVC pipe or cement.
Crooked Grind – This is a term that is used to describe a nose grind where the nose is sliding at the same time.
Dampening – This involves controlling and minimizing resonance in vibration that is created using the energy that is separated by the surface and the board flex. This is a term that is used to describe any material that is built into the core of the board or the edges in order to keep the board responsive and quiet.
Darkslide - This is a term that is used to describe flipping the board upon approaching something to grind, grinding on the grip tape while the feet are on the very bottom of the board.
Drop In – This is a term that is used to describe entering the obstacle or the ramp from above.
Durometer - This is a term that is used to describe the measurement of hardness or resiliency of a wheel made from urethane.
Face Plant - This is a term that is used to describe the face of the rider hitting the ground before the rest of his or her body does.
Fakie – This is a term that is used to describe riding backwards.
Front Side – This is a term that is used to describe executing a turn or a trick with the body facing in the forward direction.
Gay Twist - This is a term that is used to describe completing a 360 in the air while riding fakie at the lip of an obstacle or a ramp, grabbing the board and heading back down front side.
Goofy Foot – This is a term that is used to describe riding with the right foot ahead of the left foot.
Grab – This is a term that is used to describe grabbing the board with either one or both of the rider’s hands.
Grind - This is a term that is used to describe riding on an object where only the trucks of the board are making contact. Examples of obstacles that can be grinded on include handrails and ledges.
Grip Tape - This is a term that is used to describe adhesive sandpaper material that is fixed to the entire top of the skateboard in order to improve the traction for the rider.
Photo Credits: albany_tim
Originally posted 2009-11-26 03:32:26. Republished by Blog Post Promoter
Related Posts -
How to Rotate Inline Skate Wheels It is important for you to know why it is important for you to rotate the wheels on your skates, and it is also important for you to have an understanding of when you should do it. There are a number of different available approaches to take when it comes...... -
Early History of Skateboarding Skateboarding goes back a lot farther than people might think. The roots of the sport can be traced back to roughly some point in the late 1940's to the early 1950's. It started as a past time for surfers when there were no good waves to ride. The early boards...... -
Benefits of Surfing Understanding the benefits of surfing will help you determine whether or not this is the right water sport for you. First and foremost, do you know what surfing is? Surfing is a unique activity involving the riding on a wave or riding along a wave using a surfboard. One of...... -
Skate Shoes for a Skateboarding Edge Skate boarding and the entire skater culture seems to become more and more popular every year. Twelve-year old girls who've never even stood on a skate board suddenly beg their parents for skater shoes. Shoe store employees are then faced with befuddled parents who aren't quite sure of the differences...... -
Top Alternative Skateboard Options Here are some of the top new and original alternative skateboards out there, most of which are so different in what they offer that they are only considered skateboards in name, rather than in form. Skateboarding has taken on many different forms through the year, as shown by these examples......
Related Websites -
Snowboarding Glossary Continued T Bolt - This is a term that is used to describe a small metal cylinder that is threaded inside and that has a disk attached to its bottom, which will prevent it from being pulled up and away from the snowboard. Technical - This is a term that is...... -
Snowboarding Glossary Continued Swiss Cheese Air - This is a term that is used to describe a situation where the rear hand is reaching between both legs, grabbing the board's heel edge before the front foot while boning the back foot. Switch - This is a term that is used to describe any...... -
Snowboarding Glossary Continued Twin Tip - This is a term that is used to describe a variety of snowboard that is specifically designed for snowboarding freestyle. This type of snowboard has a tip and a tail that are identical, making it possible for the board to be ridden in both directions in a...... -
Snowboarding Glossary Half Cab - This is the free riding equivalent of the Caballerial, where the rider performs a 180 off of a straight jump to go from fakie into normal. Half Pipe - In snowboarding this is a structure that is built out of snow consisting of two opposing walls that...... -
Snowboarding Glossary Continued Twin Tip - This is a term that is used to describe a variety of snowboard that is specifically designed for snowboarding freestyle. This type of snowboard has a tip and a tail that are identical, making it possible for the board to be ridden in both directions in a......
Online Stores
July 16th, 2010 — Surf Skate Wake, skateboarding
180 – This is a term that refers to a half rotation.
360 - This is a term that refers to a single full rotation.
540 - This is a term that describes a 540-degree rotation while in the air. This is equal to one and a half full rotations.
720 - This is a term that typically refers to two simultaneous 360-degree turns, either forward or in a backward direction.
900 - This is a term that describes two and a half full rotations.
5-0 Grind - This term describes a type of grind in which the only trick that is grinding is the back truck.
50/50 - This term describes a type of grind in which both of the trucks are grinding.
Abec - This term is used to describe the tolerance rating system that is applied to bearings, designating the level for the bushing’s stress resistance. Higher Abec ratings refer to tighter bearings and lower Abec ratings refer to looser bearings.
Acid Drop – This refers to riding straight off of an obstacle, free falling to the ground.
Air – This is the term that is used to refer to situations where riders are clearing obstacles or jumps.
Alley Oop - This refers to a situation where a trick is being performed in an opposite direction from the direction that the skater is moving in.
Backside - This refers to a situation where a trick or a turn is being executed in a direction that the rider’s back is facing.
Bank - This is any area that is sloped below 90 degrees.
Bearings - There are both inner and outer parts in bearings, and the balls ride on them, making it possible for the wheels to turn.
Blunt - This describes a situation where a trick is being performed and the board’s contact spot with whatever obstacle is being used is the tail area behind the board’s back trucks. The wheels should also be on top of the item in question.
Board – In skateboarding, this is also known as a deck, and is the platform part that all of the hardware is mounted on to. The most common material used for a skateboard deck is maple laminate.
Boardslide or Railslide - This is a trick that involves sliding on an obstacle or a lip where the underside of the board is the contact point.
Brain Bucket – This is a slang term that refers to a helmet.
Caballerial - On flat ground this is a term that describes riding fakie, do an ollie 360 without any grabbing. On a vert ramp, this is a term that describes riding fakie, and doing an ollie 360 without grabbing at the lip. This trick was invented by Steve Caballero
Carve - This is a term that describes making long curving arcs while skating, especially downhill.
Photo Credits: mikebaird
Originally posted 2009-11-16 03:23:30. Republished by Blog Post Promoter
Related Posts -
How to Clean and Lubricate Skate Bearings Clean bearings are going to roll smoother, roll faster, and will last much longer than dirty bearings. Dirt and grime foul the bearings and can cause pitting which make rotation uneven and rough. The following paragraphs have instructions for cleaning bearings with removable shields. If you do not have removable...... -
High Tech Deck Skate Park Choices There is a great deal of interest in high tech deck skate park materials today as more and more people are becoming interested in the sport once again. As you watch the interest in skateboarding becoming more popular every year, there is more reason than ever for the innovations in...... -
Skateboarding Tricks There are a wide variety of different skateboarding tricks that you can try to perform out there. They range significantly in terms of level of difficulty. There are a wide variety of different tricks that you can learn, depending on what your own skateboarding skills are and what types of...... -
Surf Skate Wake Board - What's Your Passion? For many people, there is nothing that they find to be more exhilarating or exciting then boarding of all types. This can mean surfing, skate boarding, wake boarding and more. For many people it may e the danger that they feel or even the endorphins that they feel coursing through...... -
Surf, Skate, Wakeboard: Gear and Accessories The thrill and action of surf boarding, skate boarding and wake boarding takes skill, practice, and receiving a few bumps and bruises. It also requires good equipment, since no amount of skill can make up for a board past its prime. Choosing the right board is a matter of preference,......
Related Websites -
Lumber Terms pt 2 Ply - This term describes a single layer of veneer. Pressure Treating - This term describes impregnating pieces of lumber with chemicals like fire retardants and preservatives through the forcing of the chemicals with high pressure into the wood's very structure. Reman - This is a shortened term referring to...... -
Snowboarding Glossary Continued Poptart - This involves airing from fakie side to forward side while in the half pipe without any rotation. Poser - This is someone that behaves as if they are better than they actually are. Pre-Peg Fiberglass - This is a stiff piece of fiberglass that is treated using epoxy...... -
Snowboarding Glossary Continued Sky - This is a term that is used to describe when big air is achieved by a rider. Slalom - This is a term that is used to describe a type of Alpine snowboarding racing where the racer has to run along a designated course where a series of...... -
Snowboarding Glossary Flute - A snow column that can be found on rocks and other terrain features as well as almost vertical slopes. Free riding - This is the term for casual snowboarding that is done on any terrain type. There are no gates, half pipes, rules, or contests. This is all...... -
More Snowboard Reviews for 2009 The K2 Jibpan for 2009 The 2009 K2 Jibpan is a jibbing snowboard intended for all mountain terrain and created to rip up the entire mountain from end to end. If you love to treat the entire mountain as if it were a park, then this is the board for......
Online Stores