Clean bearings are going to roll smoother, roll faster, and will last much longer than dirty bearings. Dirt and grime foul the bearings and can cause pitting which make rotation uneven and rough. The following paragraphs have instructions for cleaning bearings with removable shields. If you do not have removable shields, then skip the following instructions. Cleaning and lubricating your bearings often will make them last a long time. Also try to avoid getting your bearings wet or sandy, as both of those are particularly bad for bearings.
The tools that you are going to need for this process include a straight pin, a small bowl or a metal pan, a bearing cleaning product, a small brush for cleaning such as a soft or a medium toothbrush, paper towels and clean towels or shop rags.
When dealing with removable shields you are going to want to insert the very tin of the straight pin into the C-rings end, which is responsible for keeping the shield in place on the body of the bearing. You should just gently pry away the C ring toward the middle of the bearing and work the pin around the circle. Now you can remove the shield as slowly as you can, making sure that you are not causing damage.
Now place the bearing in a container and flush it with the cleaner to get rid of contaminates. Citrus based cleaners work particularly well for this purpose. Use the toothbrush to remove grime and dirt. If the bearings happen to be particularly dirty, then this step may need to be repeated. Make sure that the solvent is changed with every rinse.
Once the bearing has been cleaned, make sure that it is patted dry gently using a towel that is clean and free of lint. Place the bearings on a paper towel and give them time to air dry. Now make sure that all of the water has had a chance to evaporate away before you move on to the next step in the process.
Once the bearing is completely dry you can add between one and two drops of a high quality lubricant to the bearing’s inside. A little bit of lubricant can really go a long way. Now you should rotate the bearing in such a way that the lubricant is worked into all of the moving parts, and make sure that all of the balls have been completely and properly covered in the lubricating agent for the best results.
Now replace the shield, placing it on the bearing and allowing the C ring to slip back into the groove that is just next to the shield. Now you can work the C-ring’s remaining length gently and slowly along that fitted groove until it has completely and fully snapped back into place. Now you can put your brand new clean bearings right back on your skates. Make sure that you spin them a bit to make sure that the lubricating agent is distributed evenly and to ensure that all of the wheels are spinning as smoothly as possible.
Photo Credits: joelogon
Related Posts -
ABEC ratings: Is higher really better? Pt. 2 Now do you see what I mean by these tolerances being mangled by the first few minutes of riding down the sidewalk? The pressure of you riding, along with the shocks of bumps and the cracks in the sidewalk will quickly add a lot more eccentricity to this groove, but...... -
ABEC ratings: Is higher really better? Pt. 1 In the worlds of inline and board skating, you will find many areas of much debate. However, one of the most contested areas you will encounter is that of skate bearings. German? Swiss? Ceramic? Stainless Steel? ABEC rating? So many choices, and so many opinions on what is better and...... -
Choosing the Right Board for Wakeboarding Wakeboarding is a sport that is booming all around the world. Many people are describing this unique sport is the new age of surfing. Anyone all around the world can take advantage of wakeboarding, providing that there is a body of water nearby that can be considered suitable. In order...... -
Surf, Skate, Wakeboard: Gear and Accessories The thrill and action of surf boarding, skate boarding and wake boarding takes skill, practice, and receiving a few bumps and bruises. It also requires good equipment, since no amount of skill can make up for a board past its prime. Choosing the right board is a matter of preference,...... -
Wakeboarding Rope Tips Part of having the best possible wakeboarding experience means you having access to the right wakeboard rope, as a wakeboard rope is what will link you from the wakeboard to the boat. The importance, then, of this wakeboard role is absolutely vital to making sure that you safely enjoy this......
Related Websites -
Carpet Steam Cleaning Tips To Preserve Your Carpet One of the best ways to clean your carpets at home would be through carpet steam cleaning. A steam cleaner is an absolute essential, particularly if you have a pet or if you have small children running around the house. By steam cleaning your carpet, you would be able to...... -
How to Handle Sand Traps Even the best golfers can end up at the bottom of a sand trap every once in awhile and it pays to know how to get out of one. This is probably one of the most frustrating hazards you can run into while you’re golfing, but there are some tips...... -
Tips For Quick and Efficient Mildew Removal Mold and mildew are types of fungi that grow in warm and moist areas. Mildew is usually white or gray in color while mold is usually red, blue, green or black in color. Because they can both be found on things inside the house, mold and mildew removal is one...... -
Bicycle Maintenance Any vehicle you own is going to need maintenance to keep performing reliably. If you would like your bicycle to not leave you stranded out on the trail, then you need to keep it in good working condition. If you love your bike, then your bike will love you back....... -
Waxing and Repairing a Snowboard Once you have achieved what we mentioned in the last blog about removing the wax from your snowboard, you can wet the sandpaper using a little bit of water, and then use a light amount of pressure in order to sand the entire base of the board. You should take......