Clean bearings are going to roll smoother, roll faster, and will last much longer than dirty bearings. Dirt and grime foul the bearings and can cause pitting which make rotation uneven and rough. The following paragraphs have instructions for cleaning bearings with removable shields. If you do not have removable shields, then skip the following instructions. Cleaning and lubricating your bearings often will make them last a long time. Also try to avoid getting your bearings wet or sandy, as both of those are particularly bad for bearings.
The tools that you are going to need for this process include a straight pin, a small bowl or a metal pan, a bearing cleaning product, a small brush for cleaning such as a soft or a medium toothbrush, paper towels and clean towels or shop rags.
When dealing with removable shields you are going to want to insert the very tin of the straight pin into the C-rings end, which is responsible for keeping the shield in place on the body of the bearing. You should just gently pry away the C ring toward the middle of the bearing and work the pin around the circle. Now you can remove the shield as slowly as you can, making sure that you are not causing damage.
Now place the bearing in a container and flush it with the cleaner to get rid of contaminates. Citrus based cleaners work particularly well for this purpose. Use the toothbrush to remove grime and dirt. If the bearings happen to be particularly dirty, then this step may need to be repeated. Make sure that the solvent is changed with every rinse.
Once the bearing has been cleaned, make sure that it is patted dry gently using a towel that is clean and free of lint. Place the bearings on a paper towel and give them time to air dry. Now make sure that all of the water has had a chance to evaporate away before you move on to the next step in the process.
Once the bearing is completely dry you can add between one and two drops of a high quality lubricant to the bearing’s inside. A little bit of lubricant can really go a long way. Now you should rotate the bearing in such a way that the lubricant is worked into all of the moving parts, and make sure that all of the balls have been completely and properly covered in the lubricating agent for the best results.
Now replace the shield, placing it on the bearing and allowing the C ring to slip back into the groove that is just next to the shield. Now you can work the C-ring’s remaining length gently and slowly along that fitted groove until it has completely and fully snapped back into place. Now you can put your brand new clean bearings right back on your skates. Make sure that you spin them a bit to make sure that the lubricating agent is distributed evenly and to ensure that all of the wheels are spinning as smoothly as possible.
Photo Credits: joelogon
Originally posted 2009-11-23 03:30:32. Republished by Blog Post Promoter
Related Posts -
Rollerblading Safely There are many people in the world that are taking pleasure in rollerblading for fun because it is an exciting sport and makes for a great workout. The sport is generally easy to learn, and learning the maneuvers is often also easy. Rollerblading allows you to be active physically and...... -
ABEC ratings: Is higher really better? Pt. 1 In the worlds of inline and board skating, you will find many areas of much debate. However, one of the most contested areas you will encounter is that of skate bearings. German? Swiss? Ceramic? Stainless Steel? ABEC rating? So many choices, and so many opinions on what is better and...... -
ABEC ratings: Is higher really better? Pt. 2 Now do you see what I mean by these tolerances being mangled by the first few minutes of riding down the sidewalk? The pressure of you riding, along with the shocks of bumps and the cracks in the sidewalk will quickly add a lot more eccentricity to this groove, but...... -
Roller Skating Mechanics One of the most popular questions that is asked by people learning how to roller skate has to do with the mechanics involved in roller skating. Many brand new roller skaters find themselves wondering how they can achieve acceleration in a forward motion while they are skating on a surface...... -
Surfing on a Budget Sometimes surfing equipment and surfing apparel can be really expensive, making this a difficult hobby to simply jump into. This is especially true if you are unsure about whether or not you would like to continue surfing. Why should you pay an arm and a leg for equipment that you......
Related Websites -
How to Clean Blinds There are many different types of window coverings available these days. But, one of the most popular are blinds. This is because they are simple, attractive, and work well for privacy while allowing light into the home, among other reasons. However, there is one aspect about blinds that most owners...... -
Simple Air Conditioning Cleaning Keeping your air conditioner clean is the best way to make sure it runs at its maximum capacity. Air conditioning cleaning will vary depending on the type of air conditioner you use, but all of them are relatively simple as long as you have basic tools and can follow directions...... -
How to Clean your Saxophone The process of cleaning a saxophone is relatively simple, but this is provided that you have a standard half bell saxophone. Straight saxophones, on the other hand, require tools that are not touched on in this entry. This entry is designed to assist in understanding the basics and mechanics behind...... -
6 Tennis Tips and Tricks Tennis tips and tricks are like small tweaks that you can make to your game in order to improve your play. If you are looking for a way to improve your capabilities as a tennis player, consider these tennis tips and tricks and then move on to look at other...... -
Removing Caulk Guide If you are planning on putting down caulk, you probably have caulk that needs to be removed. Unless you are installing something brand new, there is likely caulk left behind that has to be taken care of. The following is a brief tutorial that will give you some useful tips......