180 – This is a term that refers to a half rotation.
360 - This is a term that refers to a single full rotation.
540 - This is a term that describes a 540-degree rotation while in the air. This is equal to one and a half full rotations.
720 - This is a term that typically refers to two simultaneous 360-degree turns, either forward or in a backward direction.
900 - This is a term that describes two and a half full rotations.
5-0 Grind - This term describes a type of grind in which the only trick that is grinding is the back truck.
50/50 - This term describes a type of grind in which both of the trucks are grinding.
Abec - This term is used to describe the tolerance rating system that is applied to bearings, designating the level for the bushing’s stress resistance. Higher Abec ratings refer to tighter bearings and lower Abec ratings refer to looser bearings.
Acid Drop – This refers to riding straight off of an obstacle, free falling to the ground.
Air – This is the term that is used to refer to situations where riders are clearing obstacles or jumps.
Alley Oop - This refers to a situation where a trick is being performed in an opposite direction from the direction that the skater is moving in.
Backside - This refers to a situation where a trick or a turn is being executed in a direction that the rider’s back is facing.
Bank - This is any area that is sloped below 90 degrees.
Bearings - There are both inner and outer parts in bearings, and the balls ride on them, making it possible for the wheels to turn.
Blunt - This describes a situation where a trick is being performed and the board’s contact spot with whatever obstacle is being used is the tail area behind the board’s back trucks. The wheels should also be on top of the item in question.
Board – In skateboarding, this is also known as a deck, and is the platform part that all of the hardware is mounted on to. The most common material used for a skateboard deck is maple laminate.
Boardslide or Railslide - This is a trick that involves sliding on an obstacle or a lip where the underside of the board is the contact point.
Brain Bucket – This is a slang term that refers to a helmet.
Caballerial - On flat ground this is a term that describes riding fakie, do an ollie 360 without any grabbing. On a vert ramp, this is a term that describes riding fakie, and doing an ollie 360 without grabbing at the lip. This trick was invented by Steve Caballero
Carve - This is a term that describes making long curving arcs while skating, especially downhill.
Photo Credits: mikebaird
Originally posted 2009-11-16 03:23:30. Republished by Blog Post Promoter
Related Posts -
How to Clean and Lubricate Skate Bearings Clean bearings are going to roll smoother, roll faster, and will last much longer than dirty bearings. Dirt and grime foul the bearings and can cause pitting which make rotation uneven and rough. The following paragraphs have instructions for cleaning bearings with removable shields. If you do not have removable...... -
Inline Skate Rockering If you have been into inline skating for any decent amount of time, then chances are you have heard the term rockering before. You might even know what rockering is, and this will just be remedial information for you. But if you do not, then this could be quite enlightening...... -
ABEC ratings: Is higher really better? Pt. 2 Now do you see what I mean by these tolerances being mangled by the first few minutes of riding down the sidewalk? The pressure of you riding, along with the shocks of bumps and the cracks in the sidewalk will quickly add a lot more eccentricity to this groove, but...... -
ABEC ratings: Is higher really better? Pt. 1 In the worlds of inline and board skating, you will find many areas of much debate. However, one of the most contested areas you will encounter is that of skate bearings. German? Swiss? Ceramic? Stainless Steel? ABEC rating? So many choices, and so many opinions on what is better and...... -
Skateboarding Lexicon Continued Concave - This is a term that describes the contouring of a skate deck. It involves the raising of the edges on each side of the board, making it somewhat bowl shaped. This helps provide more traction and control to the rider for staying on and performing tricks. Continuous Edge......
Related Websites -
Snowboarding Glossary Continued Twin Tip - This is a term that is used to describe a variety of snowboard that is specifically designed for snowboarding freestyle. This type of snowboard has a tip and a tail that are identical, making it possible for the board to be ridden in both directions in a...... -
Triathlon Terms Here is a brief glossary of terms used in triathlon training and triathlon racing. 70.3 - This term is used to describe a Half Ironman race distance, which is a 1.2 mile swim, a 56 mile bike an 13.1 mile run. 140.6 - This term is used to describe an...... -
Hunting Glossary Continued Cable Guard - This holds the cables off to the side so that there is always ample arrow clearance. Cable Slide - This is designed to fit onto the cable guard, its purpose is to help the cables move across the guard smoothly. Buying a new cable slide made from...... -
Snowboarding Glossary Continued T Bolt - This is a term that is used to describe a small metal cylinder that is threaded inside and that has a disk attached to its bottom, which will prevent it from being pulled up and away from the snowboard. Technical - This is a term that is...... -
Snowboarding Glossary Continued Sky - This is a term that is used to describe when big air is achieved by a rider. Slalom - This is a term that is used to describe a type of Alpine snowboarding racing where the racer has to run along a designated course where a series of......